Drum Clamp

Drum Clamp - Forklifts are truly designed to lift, move and store things placed on pallets. For facilities that utilize drums, they usually need an attachment to be able to handle lifting, moving and storing them. There are some different attachments that a business can utilize for all your drum moving, storing and lifting needs. These attachments are specifically meant in order to deal with drum containers - therefore there is no chance of damage to the item or drum container when they are stored, moved or lifted.

Drum Positioner And Grab
The drum positioner can be used in order to load and unload drums off of vehicles, racks, and drum stands. These are obtainable in three and four tine models. This particular accessory is fully automatic, thus enabling the individual operating it to be able to operate all from the comfort of the lift truck seat. Able to move large and extra large plastic drums, steel, its capacity is 210 liters. This attachment is intended for drum pyramid stacking.

The drum grab is fork designed and mounted with the sole purpose of dealing with steel drums which have rolling hoops. Though the purpose for the design was to handle steel drums with rolling hoops, the drum grab could accommodate the transporting of extra large and large plastic drums. Drum capacity maximum is 210 liters for steel drums with rolling hoops and 220 liters for plastic drums.

The Rotator
The drum rotator is a forklift accessory which mounts on to the forks themselves. The objective of the drum rotator is to pick up the drum and turn it upside down. The drum fits in to the rotator utilizing a steel clamp which fits over the center of the drum. The rotation is performed by either a continuous loop chain or a crank handle. The crank handle is meant for operations that occur beneath shoulder level. For operations that must happen higher than shoulder level, the continuous circle chain will be used.

Drum tines are straightforward fork mounted accessory which could be used for unstacking or stacking 210-liter steel drums. Stacking involves nothing fancy, merely easy horizontal placement of the drums. The carriage-mounted accessories lessen the load center of the drums.

Automatic Tongs
Drum tongs come in automatic and semi-automatic versions. They are for use in the open topped or tight head steel drum styles. The drum pincers can be connected in a couple of ways to the lift truck. One method is to attach them beneath a fork-mounted hook. One more way is to connect them to a carriage mounted jib or a fork-mounted jib. Both the semi automatic and the automatic have a drum capacity of 210 liters. With the automatic, there is no requirement for the individual operating it to ever leave the seat of the forklift.

Rim Grip Handler
The Rip Grip Drum Handler is the optimal choice for lift truck attachments, when there is a necessity to stockpile drums with inadequate space accessible. This accessory can be used on either one hundred twenty liter and two hundred ten litter drums. The Rim Grip Handler functions by using metal jaws to be able to hold the edge of the drum. It picks the drum up and puts it down without requiring any room between the drums. The typical unit utilized in the trade is a zinc-plated handler, even if, this particular accessory is obtainable in stainless steel for the food and drink market.

Click to Download the pdf

Forklift Parts

Forklift Throttle Body

Forklift Throttle Body - Where fuel injected engines are concerned, the throttle body is the component of the air intake system which controls the amount of air that flows into the engine. This mechanism works in response to operator accelerator pedal input in the main. Generally, the throttle body is positioned between the intake manifold and the air filter box....

More

---

Winch for Forklift

Winch for Forklift - Winches are mechanical devices which could pull up or wind out the tension of a cable, wire rope, rope or a wire cable. These devices, in its most basic form, are made of a spool and a hand crank. More complicated winches are found at the heart of machines like elevators, steam shovels and tow trucks....

More

---

Parts for Electric Forklift

Electric Forklift Part - Using a charging stations is the most common way to be able to charge an electrical forklift battery. The charging station will hook up together with the battery by utilizing two 8-foot cords. The latest models are outfitted together with an automatic charge shut off. This charges the battery hard for 6 hours, then at a...

More

---

Forklift Starter and Alternator

Forklift Alternators and Starters - The starter motor these days is normally either a series-parallel wound direct current electric motor which has a starter solenoid, which is similar to a relay mounted on it, or it could be a permanent-magnet composition. Once current from the starting battery is applied to the solenoid, basically through a key-operated switch, the solenoid engages...

More

---

Remanufactured Forklift Part

Remanufactured Forklift Parts - Lift trucks are quite pricey pieces of equipment since a new electric lift truck unit could cost anywhere from eighteen thousand to twenty five thousand, for a 5000lb equipment. Additionally, several thousands of dollars will have to be invested in a battery charger and battery. A similar internal combustion lift truck of similar lift capacity would...

More

---

Clark Forklift Part

Clark Forklift Parts - Performing globally, there are currently 350,000 Clark forklifts and lift trucks in operation, with in excess of 250,000 of those operating in North America. Clark has five major lines of lift trucks across the globe, making it one of the most expansive organizations in the industry. Heavy duty vehicles ranging from 1,500lb to 18,000lb capacities, duel...

More

---

Stacker Forklift Attachments

Stacker Forklift Attachment - A pallet stacker is a variety of pallet jack that is utilized to transfer, stack and haul palletized cargo that are too heavy for manual lifting. Its key purpose is to load and unload pallets on trucks, as well as transferring pallets to and from various locations within a storage space or warehouse. On the whole...

More

---

Forklift Mast Bearing

Mast Bearings - A bearing is a device that allows constrained relative motion among two or more parts, often in a linear or rotational procession. They can be commonly defined by the motions they allow, the directions of applied cargo they can take and according to their nature of utilization. Plain bearings are very commonly utilized. They make use of...

More

---