Forklift Electrical Part

Electrical Parts for Forklifts - Lift trucks together with other forklifts can have particular labels used in certain hazardous locations. The label indicates that this specific model of forklift meets the minimum standards of ANSI/UL 553 for electric forklifts or ANSI/UL 558 meant for internal combustion engine forklifts.

The use for labels intended for lift lift trucks may be found in National Fire Protection Association NFPA 505 - Powered Industrial trucks including: Areas or Use, Maintenance and Operation, and Type Designations. Check with your local insurance carrier and Fire Marshall for additional info concerning the permitted uses of industrial powered lift trucks in your application.

If the forklift has been found to satisfy the outlined criteria, the following labels could be attached. A labeled truck will have the model description placed on the forklift nameplate and would have one of the following labels attached.

Click to Download the pdf

Forklift Parts

Forklift Throttle Body

Forklift Throttle Body - Where fuel injected engines are concerned, the throttle body is the component of the air intake system which controls the amount of air that flows into the engine. This mechanism works in response to operator accelerator pedal input in the main. Generally, the throttle body is positioned between the intake manifold and the air filter box....

More

---

Winch for Forklift

Winch for Forklift - Winches are mechanical devices which could pull up or wind out the tension of a cable, wire rope, rope or a wire cable. These devices, in its most basic form, are made of a spool and a hand crank. More complicated winches are found at the heart of machines like elevators, steam shovels and tow trucks....

More

---

Parts for Electric Forklift

Electric Forklift Part - Using a charging stations is the most common way to be able to charge an electrical forklift battery. The charging station will hook up together with the battery by utilizing two 8-foot cords. The latest models are outfitted together with an automatic charge shut off. This charges the battery hard for 6 hours, then at a...

More

---

Forklift Starter and Alternator

Forklift Alternators and Starters - The starter motor these days is normally either a series-parallel wound direct current electric motor which has a starter solenoid, which is similar to a relay mounted on it, or it could be a permanent-magnet composition. Once current from the starting battery is applied to the solenoid, basically through a key-operated switch, the solenoid engages...

More

---

Remanufactured Forklift Part

Remanufactured Forklift Parts - Lift trucks are quite pricey pieces of equipment since a new electric lift truck unit could cost anywhere from eighteen thousand to twenty five thousand, for a 5000lb equipment. Additionally, several thousands of dollars will have to be invested in a battery charger and battery. A similar internal combustion lift truck of similar lift capacity would...

More

---

Clark Forklift Part

Clark Forklift Parts - Performing globally, there are currently 350,000 Clark forklifts and lift trucks in operation, with in excess of 250,000 of those operating in North America. Clark has five major lines of lift trucks across the globe, making it one of the most expansive organizations in the industry. Heavy duty vehicles ranging from 1,500lb to 18,000lb capacities, duel...

More

---

Stacker Forklift Attachments

Stacker Forklift Attachment - A pallet stacker is a variety of pallet jack that is utilized to transfer, stack and haul palletized cargo that are too heavy for manual lifting. Its key purpose is to load and unload pallets on trucks, as well as transferring pallets to and from various locations within a storage space or warehouse. On the whole...

More

---

Forklift Mast Bearing

Mast Bearings - A bearing is a device that allows constrained relative motion among two or more parts, often in a linear or rotational procession. They can be commonly defined by the motions they allow, the directions of applied cargo they can take and according to their nature of utilization. Plain bearings are very commonly utilized. They make use of...

More

---